YSI DIQ/S 182 XT-4-MOD User Manual
Page 30
Advertising
Installation
System 182 XT-4
3 - 16
ba76028e01
02/2012
Note
Only use the plastic tapping screws supplied for attaching the contact
base. They ensure the correct fit.
Premounting the ISO
blind nuts
Fig. 3-9
Premounting the ISO blind nuts (variant 2)
5
Fix the contact base (pos. 6 in Fig. 3-8) onto the DIQ/S 182 XT-
4-MOD with the two plastic self-tapping screws (pos. 7).
6
Insert the cheese-head screws (pos. 8 in Fig. 3-9) with the
plastic washers in the drilled mounting holes in the module lid
and loosely screw in the ISO blind nuts (pos. 9).
8
9
MIQ module
Advertising