YSI DIQ/S 182 XT-4-MOD - Manual (Page 91)

System 182 XT-4 Relay outputs
6 - 1 ba76028e01 02/2012
6 Relay outputs
6.1 Outputs of the system 182 XT-4
The DIQ/S 182 XT-4-MOD has three relay outputs.
Functions for relay
outputs
 System monitoring
 Sensor monitoring
 Limit indicator
 Frequency output
 Pulse-width output

Sensor controlled
 Cleaning
 Manual control
Relay outputs can be configured as openers or closers.
Note
You can view the current states of the relay outputs in the measured
value and status display (see section 4.2).
Valve outputs
(MIQ/CHV PLUS)
The MIQ/CHV PLUS valve module is administrated by the system as a
valve output (designation, MIQ/CHV PLUS V1). The relevant setting
tables are available via the SETTINGS menu.
Note
The installation and settings of the valve module are described in the
operating manual of the MIQ/CHV PLUS.