Clear-Com HX System Frames User Manual
Page 106
6. If the cable is connected correctly, the application will connect and a Xilinx chip chain will be
shown. If the cable is not connected correctly, a cable connection warning is given.
Figure 69: Example Xilinx chip chain
7. The Assign New Configuration File dialog asks you to select an FPGA image for the first
device in the chain or to bypass that device.
In this example procedure, the first device will be bypassed and an FPGA image will be
assigned to the second device.
• For the first device, press Bypass.
• For the second device, select the FPGA image (*.mcs) from the hardware DVD:
Hardware DVD > Eclipse HX-Omega-Median-Delta > xxxxxxZ – EQUE FPGA
(where xxxxxxZ represents the product number).
A summary dialog is presented. Ensure that the Erase Before Programming and Verify
flags are set. Click OK.
99
Eclipse HX Upgrade Guide