Clear-Com HX System Frames - Manual (Page 18)

Order System component Upgrade procedure(s) Notes
Display module
13.1 Upgrading panels using EHX
7 I-Series 13.1 Upgrading panels using EHX
8 CellCom / FreeSpeak MKII
Beltpack / Antenna / Splitter
12 Upgrading CellCom / FreeSpeak wireless systems
Beltpack application upgrade required
9 MVX-A16 card 7.1.2 Upgrading the MVX-A16 card boot and application code using the Renesas
FDT
7.3 Upgrading the MVX-A16 card FPGA with Xilinx tools
Clear-Com recommends upgrading
the MVX boot and application code
using the combined MVX boot and
application code file. See the
Hardware DVD.
10 Eclipse HX-PiCo 6.1 Changing the Eclipse HX-PiCo PROM
6.2 Changing the Eclipse HX-PiCo RAM
6.3 Changing the Eclipse HX-PiCo DIP switches
6.4 Upgrading the Eclipse HX-PiCo application code
6.5.2 Upgrading the Eclipse HX-PiCo MVX boot and/or application code using
the Renesas FDT
6.7 Upgrading the Eclipse HX-PiCo CPLD and FPGA code with Xilinx tools
If you are upgrading the PiCo to an
HX-PiCo please contact your Clear-
Com representative to establish if
your hardware is HX ready. If your
PiCo hardware is not HX ready then
this is a factory only upgrade.
11 AES-6 No upgrade required.
12 Production Maestro 4.5 Updating Production Maestro Pro
Table 2: Procedures for upgrading from ECS v5.2.4 to Eclipse HX v7.5
11 Eclipse HX Upgrade Guide