Clear-Com HX System Frames User Manual
Page 86
7. If the cable is connected correctly, the application will connect and a Xilinx chip chain will be
shown. If the cable is not connected correctly, a cable connection warning is given. The full
chain should show two devices, as shown in the example figure below.
Figure 48: Example Xilinx chip chain
8. The Assign New Configuration File dialog asks you to select an FPGA image for the first
device in the chain or to bypass that device.
In this example procedure, the first device will be bypassed and an FPGA image will be
assigned to the second device.
• For the first device, press Bypass.
• For the second device, select the FPGA image (*.mcs format). The FPGA file is
available from the hardware DVD:
• Hardware DVD > Eclipse HX-Omega-Median-Delta > xxxxxxZ – MVX
FPGA (where xxxxxxZ represents the product number).
79
Eclipse HX Upgrade Guide