Clear-Com HX System Frames User Manual
Page 117
2. Install the Renesas Flash Development Toolkit (FDT), which is available from either of the
Eclipse HX v7.5 DVDs:
• Software DVD > 3rd_Party_Software > RenesasFDT
• Hardware DVD > 3rd_Party_Software > RenesasFDT
Accept the default install settings.
3. Start the Renesas Flash Development Toolkit (FDT) from Programs, selecting the basic
Startup option.
4. Access the configuration (settings) dialogs, by selecting Options > New Settings...
Configure the FDT, as shown in the table below:
Settings dialog / option
Setting to enter
Select Device
H8S/2318F
Select Port
COM1 (Change to match a COM port present on the PC)
CPU Frequency
25.0 Mhz
Connection
Boot mode
Recommended Speed
38400 (Deselect the Use-Default option)
Protection
Automatic
Messaging
Advanced
User Area
Selected (Checked)
Readback verification
Yes
Table 32: FDT settings
Note:
The first time the FDT is run, the settings dialogs are displayed by default. After the FDT has
been configured, the settings dialogs are no longer shown by default.
5. In the Download window, click Options and ensure that:
• Auto-Disconnect is selected (checked).
• The Download File radio button is selected.
110
Eclipse HX Upgrade Guide