Software dvd, 4 fitting the eclipse hx door panel, Fitting the eclipse hx door panel – Clear-Com HX System Frames User Manual
Page 11
Software DVD
The software DVD contains:
• The EHX configuration software, which is used to manage and configure your Eclipse
HX devices.
• Production Maestro Pro,
which provides fast, intuitive audio routing control for your
Eclipse HX system.
• A full set of Eclipse HX documentation, including release notes and user guides.
The software DVD also contains the latest application code files for your Eclipse HX devices,
including Eclipse HX matrices, interface cards and interface modules and supported panels (I-
Series and V-Series panels).
Note:
The separate and combined MVX boot and application code files are located on the software
DVD. The MVX FPGA code is located on the hardware DVD.
The hardware DVD also includes the third party software that may be used during upgrades.
You must upgrade to the latest application code files when upgrading to Eclipse HX v7.5. You
require both DVDs to complete a full upgrade to Eclipse HX v7.5.
Tip:
You can find user documentation, brochures and summary information for all Clear-Com’s
products (including the Eclipse and Eclipse HX systems), on the Clear-Com website at:
2.1.4 Fitting the Eclipse HX door panel
To enable you to change the branding of Eclipse Median and Eclipse Omega matrices that have
been upgraded to Eclipse HX, Clear-Com provides an Eclipse HX door panel kit.
The figures that illustrate the procedure below feature an Eclipse Median matrix. However, the
procedure is also applicable to Eclipse Omega matrices.
Tip:
For more information about fitting the Eclipse HX door panel to your upgraded Eclipse
Median and Eclipse Omega matrices, see the Eclipse Matrix Door Replacement
Instructions, included with your kit.
4
Eclipse HX Upgrade Guide