Clear-Com HX System Frames - Manual (Page 37)

9. Download the new application code (firmware) to the CPU card(s), using Tera Term.
a. Place the erased CPU card in serial download mode. Set the DIP switches on the
CPU card as follows:
Figure 17: Tera Term: DIP switches, serial download mode
b. Insert the CPU card into the Eclipse HX-Median / Eclipse HX-Omega / Eclipse HX-
Delta matrix. The LED on the front of the matrix should flash LD AP.
c. In Tera Term, open File and select Send file… Ensure that the BINARY option box
is selected.
Figure 18: Tera Term: Send file…
d. In the Send file dialog > Select the file to download, navigate to the CPU card
application code (firmware) *.fwr file:
i. Go to Software DVD > Eclipse HX-Omega-Median-Delta > xxxxxZ –
Config application code (where xxxxxxZ represents the product number).
The folder contains the *.fwr file and a Read Me file (*.txt) with version
information.
ii. Select the*.fwr file and click OK / Open. Ensure that the correct file name is
displayed in the dialog.
30 Eclipse HX Upgrade Guide