Clear-Com HX System Frames - Manual (Page 144)

d. Select the Use the following IP address radio button and enter 172.16.5.50 into the
IP address line. Set the Subnet mask to 255.255.0.0.
Note:
It is advisable to switch off any wireless Wi-Fi connections that maybe running on
your PC when doing this upgrade.
6. Start the TFTP server application.
7. Click the options icon (spanner) to display the options window. Check that the C:\TFTP\ folder
is set as the path.
Figure 104: TFTPUtil Options
8. Select the icon with two blue cogs on the left hand side of the window. Check the settings as
below.
Figure 105: TFTPUtil settings
9. If a firewall is running it may request permission for the program to have access when the
TFTP server is run for the first time. Click Yes. Click OK and OK again.
10. Check that your PC IP address is correctly displayed on the main header of the TFTP
application:
137 Eclipse HX Upgrade Guide