Clear-Com HX System Frames User Manual

Page 151

Advertising
background image

3. Power up the TEL-14.

4. Start Flash Magic. Configure the following settings for the 5 purple numbered boxes in the

Flash Magic dialog:

Box

Setting(s) to enter

1

The COM port to which you are connected.
Baud Rate: 2400
Device: 89LPC935
Oscillator Frequency: 3.5795 MHz

2

Select Erase blocks used by Hex File

3

Enter the name of the file (710756Z .hex) to be loaded, or use Browse to
locate the file.

4

Ensure all boxes are clear

5

Do not press Start.

Table 41: FlashMagic settings

Figure 111: FlashMagic configuration dialog

5. In the menu options along the top of the Flash Magic dialog, select ISP (second option from

the left).

From the drop-down menu, select Start Bootloader.

144

Eclipse HX Upgrade Guide

Advertising
This manual is related to the following products: