4 connect the humidity sensor, Installation 3.4.4 connect the humidity sensor – Hach-Lange PHOSPHAX indoor sc User Manual
Page 22
Advertising
22
Installation
3.4.4 Connect the humidity sensor
CAUTION
The enclosure may tip forwards if it has not been fixed in
place. Only open the enclosure if the enclosure is properly
mounted.
1. Remove power from the instrument.
2. Open the enclosure door and secure with the door hook.
3. Connect the humidity sensor wires to the terminal screws on
the collecting tray (
Figure 12 Connect the humidity sensor
1
Collecting tray
2
Humidity sensor connections
Advertising
This manual is related to the following products: