Hach-Lange PHOSPHAX indoor sc - Manual (Page 37)

37
Operation
CONFIGURE (continued)
DEFAULT SETUP Prompt as to whether the factory settings are to be re-applied.
LAST CHANGE Indication of the last change to a setting on the configuration menu.
MAINTENANCE
INFORMATION
LOCATION 1 Indication of measuring location 1
LOCATION 2 Indication of measuring location 2 (on two-channel version)
TYPE Indication of instrument type
SENSOR NAME Indication of instrument name
SERIAL NUMBER Indication of serial number
RANGE Indication of measuring range
OPTION Indication of instrument option (filtration probe/1-channel/2-channel)
SOFTWARE PROBE Filtration probe software (on filtration probe operation)
SOFTWARE PHOS. Instrument software
LOADER Detailed information on the software in the instrument
APPL Detailed information on the software in the instrument
STRUCTURE Detailed information on the software in the instrument
FIRMWARE Detailed information on the software in the instrument
CONTENT Detailed information on the software in the instrument
LANGUAGE List of languages that are supported by the installed language package.
MEASURING DATA
LOCATION1
GAIN CORR
Indicates the correction factor set for correcting the measured values at measuring location 1.
DATE Indicates the date of the last change to the correction factor.
LOCATION2 On 2-channel version
GAIN CORR On 2-channel version
DATE On 2-channel version
DEXT LAST VALUE Indication of the delta extinction (EXT MESS-EXT REF) of the last measurement.
EXT MESS Extinction during the last measurement
EXT REF Extinction during the last zeroing
AMPLIFY MEAS. Measuring amplifier gain factor
AMPLIFY REF Reference amplifier gain factor
MEAS. ZERO Measuring amplifier measured value during zeroing
OFFSET MEAS. Measuring amplifier offset
MEAS. Measuring amplifier measured value during measurement
REF ZERO Reference amplifier measured value during zeroing
OFFSET REF Reference amplifier offset
REF Reference amplifier measured value during measurement
PROCESS Information what instrument is currently doing (measurement, calibration etc.)
REMAINING TIME Remaining time for current process, counting down to zero
LIST OF VALUES List of the last 10 measured values
5.2 Sensor setup menu (continued)