Hach-Lange PHOSPHAX indoor sc - Manual (Page 23)

23
Installation
3.4.5 Connect the sample supplies and drain
Before connecting tubing or cables, determine the option number
that corresponds the system configuration. Refer to
Table 1 . Based
on the option number, determine the sealing plug that will be used
to seal the enclosure openings, refer to
Table 2 .
When the option number is determined, refer to Appendix A
Plumbing and connection options on page 65 for installation
information.
Table 1 System configuration options
Location Filtration Drain
Number of
analyzers
Sample
lines
(Ch1, Ch2)
Number of
parameters 1
Option
#
Refer to the following section
for more information:
OUTDOOR
Filter Probe sc Any 1 1 1 1 A.5 on page 68
Filter Probe sc Heated 1 1 1 2 A.6, page 70
FILTRAX Heated 1 1 1 3 A.7, page 72
FILTRAX 2 heated 2 1 2 4 A.8, page 74
2 FILTRAX Heated 1 2 1 5 A.9, page 77
2 FILTRAX 2 heated 2 2 2 6 A.10, page 79
INDOOR
Filter Probe sc Unheated 1 1 1 7 A.11, page 81
FILTRAX Unheated
1 1 1 8 a A.12, page 83
2 1 2 8 b A.13, page 85
2 FILTRAX Unheated
1 2 1 9 a A.14, page 87
2 2 2 9 b A.15, page 89
Continuous
sample feed
Unheated
1 1 1 10 a A.16, page 91
2 2 2 10 b A.17, page 93
2 continuous
sample feeds
Unheated
1 2 1 11 a A.18, page 95
2 2 2 11 b A.19, page 97
1 For 2-parameter options, refer to Connect a 2-parameter option on page 66 .
Table 2 Sealing plug types
Option
Analyzer 1 Analyzer 2
Opening 1 Opening 2 Opening 3 Opening 1 Opening 2 Opening 3
1 Plug 2 Plug 3 Plug 3 — — —
2 Plug 2 Plug 1 Plug 3 — — —
3 Plug 1 Plug 1 Plug 3 — — —
4 Plug 1 Plug 1 Plug 3 Plug 1 Plug 1 Plug 3
5 Plug 1 Plug 1 Plug 1 — — —
6 Plug 1 Plug 1 Plug 1 Plug 1 Plug 1 Plug 3
7 Plug 2 Plug 3 Plug 3 — — —
8 Plug 1 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3
9 Plug 1 Plug 1 Plug 3 Plug 3 Plug 3 Plug 3
10 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3
11 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3