Pulse length / pulse frequency controller, Controller functions – Hach-Lange SI794 I User Manual User Manual
Page 94
Advertising
94
Controller functions
Pulse length / pulse frequency controller
Pulse length controller (PLC)
The pulse length controller is used to operate a valve as an
actuator. It switches the contact on for a time that depends on
the controller output. The period is constant. A minimum ON
time of 0.5 sec is maintained even if the controller output takes
corresponding values.
ON time (Y = 80 %)
Output signal (relay contact) of pulse length controller
ON time (Y = 20 %)
Pulse length
1
0
1
0
Advertising