Hach-Lange EVITA OXY Basic User Manual - Manual (Page 65)

Deutsch 65
USC 7000 Relaisausgangseinstellungen
Relaisausgangseinstellungen 1 bis 5 für USC 7000.
Abbildung 25 Relais-Output USC 7000
* Im Abschnitt “Grundeinstellungen des Messwertgebers” ( Abbildung 22, Seite 62 ) ausgewählte Einheiten.
** Damit der Stromausgang sich nach einer Reinigung stabilisieren kann, wird die USC den Stromausgang während “Reinigungszeit” und weitere 10 Minuten festlegen.
Output
USC
I out 1
USC
Timer interval
000. h
RELAY 1
1-999 hours
Active time
00 min
RELAY 1
1-59 min
Relay at
active Open
RELAY 1
Open/Closed
Relay at
warning Open
Open/Closed
Function
Error
RELAY 1
RELAY 1
Relay at
error Open
RELAY 1
Open/Closed
RELAY 1
Setpoint
050.00 mg/l
RELAY 1
0 - 999.99
Hysteresis
005.00 mg/l
RELAY 1
0 - 999.99
Relay above
limit Open
RELAY 1
Open/Closed
Relay 1
USC
Relay 2
USC
Relay 3
USC
~~
Relay below
limit Open
RELAY 1
Open/Closed
081R9415.02.02
Relay 4
USC
Relay 5
USC
Function
Off
RELAY 1
One transmitter
All Errors
All Warnings
Timer
Off
Relay at
warning Open
Open/Closed
RELAY 1
Relay at
Error Open
RELAY 1
Open/Closed
Select
transmitter no. 00
RELAY 1
00-15 Error
Warning
Hi Limit
Lo Limit
Cleaning
Oxygen
Temperature
Value
Oxygen
Setpoint
035.00 ºC
RELAY 1
Hysteresis
005.00 ºC
RELAY 1
0 - 999.99 0 - 999.99
* *
* *
Cleaning interval
000. h
RELAY 1
Cleaning time
00 min
RELAY 1
Relay at
cleaning Open
RELAY 1
1-999 h 1-59 min Open/Closed
**