Hach-Lange EVITA OXY Basic User Manual - Manual (Page 89)

English 89
Figure 3 Transmitter assembly Figure 4 Installation
v
min.
= 0.05 m/s (2”/sec).
(max. 14
’)
Installation on a
concrete wall
Installation in a pipe
Installation of the
transmitter OXY 4150
on the cable clamp
The holder for the
transmitters OXY 4100
and 4150 is installed with
two screws AISI 316
(maximum 8 mm or 5/
16") directly to a
concrete wall. The OXY 4150
transmitter can as shown
above be installed in a
pipe.
The transfer cable is
strong enough to hold
the loose-hanging
transmitter.
The cable clamp (A) is
available as an
accessory from
Hach Lange,
(B) however is not.