Operation – Hach-Lange BUHLER 2000 Water sampler User Manual
Page 35
Operation
Page 35
Manual Bühler 2000/1029
3.3.3
**********************
01.01.2009 17:28:17
SAMPLES TOTAL
REQUESTED:
1
TAKEN:
0
**********************
By pressing the „down“ arrow key again, the „total“ number of taken
and requested samples of the running program is displayed.
3.3.4
**********************
01.01.2009 17:28:18
SAMP. CURRENT BTL
REQUESTED:
1
TAKEN:
0
**********************
Display of the taken and the requested samples of the current
bottle.
3.3.5
**********************
PROGRAM NO. 1
INFO MEMORY
*********************
By pressing the ENT key, the menu „INFO MEMORY“ is displayed.
Here you can have a look at the stored messages.
3.3.6
**********************
PROGRAM NO. 1
BOTTLE MEMORY
**********************
By pressing the ENT key the bottle memory is displayed as follows:
- Number of the bottle
- Date and filling period (from – to)
- Total filling time
- Taken and requested samples.
With the up/down keys you can scroll to each bottle.
3.3.7
**********************
INPUT SIGNALS
FILLING LEVEL 100
FLOW ANAL. 12.2 mA
EVENT 0 / FLOW DIG 0
**********************
Display of „Input Signals“:
-
Filling level (state of level electrodes. The indicated value has no
dimension!)
-
Flow analogue
-
Event input
-
Flow digital
3.3.9
**********************
PROGRAM NO. 1
ANALOGUE FLOW
SIGNAL
**********************
By pressing the ENT key, the stored mA-signal is shown. The
values displayed are hourly average values.
3.3.10
**********************
PROGRAM NO. 1
MANUAL SAMPLE
**********************
Here you can trigger manually a single sample extraction into any
bottle (bottle No. can be selected).