Hach-Lange BUHLER 2000 Water sampler - Manual (Page 56)

Operation
Page 56 Manual Bühler 2000/1029
DIGITAL INPUTS / OUTPUTS
You can assign the following selectable messages to the digital inputs or outputs:
Setup-> System Settings -> Digital Outputs / Digital Inputs
Remark: The messages are related to the type of sampling system. Only the messages related to
your sampler type are displayed!
DIGITAL OUTPUTS:
14.2 PROGRAM ACTIVE
14.3 PROGRAM COMPLETED
14.4 BOTTLE CHANGE
14.5 SAMPLING
14.6 Error: ALL
14.7 Error: ELECTRODES
14.8 Error: SUCTION
14.9 Error: DISTRIBUTOR
14.10 Error: MAX. SAMP/BTL.
14.12 Error: ANALOGUE SIGNAL
14.13 Error: VOLTAGE LOSS
14.16 Counter: SAMPLING OK
14.17 Counter: SAMPLING ERROR
14.18 Counter: DIGITAL PULSE
DIGITAL INPUTS:
15.2 START PROGRAM
15.3 STOP PROGRAM
15.4 SAMPLING
15.5 BOTTLE CHANGE