Hach-Lange BUHLER 2000 Water sampler - Manual (Page 37)

Operation
Page 37 Manual Bühler 2000/1029
4.1.2
**********************
PROGRAM NO. 1
PAUSE (29:03)
*CONTINUE PROGRAM
**********************
Now you are in the pause mode. The display shows the still
remaining pause time. After expiration of this time, the system will
return automatically to the running program.
The pause mode can be left at any time by pressing the ENT key.
3.3.1
**********************
PROGRAM NO. 1
START 7.01./17:08
BOTTLE 1
< PAUSE WITH ENT >
**********************
Display shown after the pause mode has been left.
8.0.1
**********************
PROGRAM NO. 1
ABORT
*YES
NO
**********************
PROGRAM ABORTION
By pressing the ESC key, a running program can be aborted.
However, before the program is aborted, you have to confirm again
with „YES“.
Remark: If the device is in a non completed cycle when
aborting the program, a corresponding message is
displayed. As soon as the sampling cycle is
completed (may take some time), there is an
automatic return to the main menu level.
MANUAL MODE
1.1.6
**********************
MANUAL SAMPLE
EXTRACTION
**********************
MANUAL MODE
A single sample extraction into any bottle can be triggered
manually.
2.5.1
**********************
MANUAL SAMPLE
BOTTLE: 1
**********************
After having pressed the ENT key you can either:
-
select the bottle number already displayed by pressing the
ENT key again
or
- enter a new bottle number for the extraction of the manual
sample.