Hach-Lange BUHLER 2000 Water sampler - Manual (Page 55)

Operation
Page 55 Manual Bühler 2000/1029
EXTENDED MALFUNCTION MESSAGES
3.5 MAX SAMP/BTL REACHED If the maximum number of samples/bottle is exceeded.
3.7 ERROR ANAL. SIGNAL At flow-dependent mode if there is no more analogue
signal.
3.8 MAX FILL. TME REACHED If the maximum bottle filling time is exceeded.
MESSAGES
The following messages can be stored in the info memory if they are activated in: Setup->
System Settings Change->Info Memory->Recording
4.2 SAMPLING (MAN)
4.3 SAMPLING (PRG)
4.4 SAMPLING (REMOTE)
4.5 SAMPLING (EVENT)
4.6 ERROR SUCTION
4.7 ERROR ELECTRODES
4.8 ERROR DISTRIBUTOR
4.9 MAX SAMP/BTL REACHED
4.10 PROGRAM STARTED
4.11 PROGRAM COMPLETED
4.12 PROGRAM PAUSE
4.13 PROGRAM CONTINUED
4.14 PROGRAM RESTART
4.15 BOTTLE CHANGE
4.17 SAMP. TAKEN (PRG)
4.18 SAMP. REQ. (PRG)
4.19 EVENT START
4.20 EVENT END
4.21 VOLTAGE LOSS FROM
4.22 VOLTAGE LOSS UNTIL
4.23 SAMP. TAKEN (BTL)
4.24 SAMP. REQ. (BTL)
4.25 ERROR ANAL. SIG FROM
4.26 ERROR ANAL. SIG ´TIL
4.28 SYSTEM START
4.29 MAX. FILLING TIME