Hach-Lange BUHLER 2000 Water sampler - Manual (Page 36)

Operation
Page 36 Manual Bühler 2000/1029
4.6.1
**********************
MANUAL SAMPLE:
BOTTLE 1
**********************
After having pressed the ENT key, you can either confirm the bottle
number already displayed or enter another bottle number. If a
different bottle number is entered, the distributor will change to the
previous bottle after the sample extraction.
This sample is stored in the memory as „manual sample“.
3.3.11
**********************
CHANGE BOTTLE TO
BOTTLE
2
*BOTTLE 3
BOTTLE 4
**********************
Here you can move the distributor to another bottle.
After having pressed the ENT key, you can select the desired bottle
number with the up/down keys. Thus the program is continued with
this bottle!
4.7.1
**********************
CONTINUING WITH
BOTTLE 3
**********************
This menu is displayed after having pressed the ENT key for
confirmation.
3.3.12
**********************
PROGRAM NO. 1
PROGRAM SETTINGS
**********************
By pressing the ENT key you can have a look at the settings of the
active (running) program.
Scroll with up/down keys.
To leave the menu, press the ESC key.
3.3.13
**********************
PROGRAM NO. 1
SYSTEM SETTINGS
**********************
By pressing the ENT key you can have a look at the system
settings.
Scroll with up/down keys.
To leave the menu, press the ESC key.
3.3.1
**********************
PROGRAM NO. 1
START 7.01./17:08
BOTTLE 1
< PAUSE WITH ENT >
*********************
PAUSE MODE
The pause mode is activated by pressing the ENT key.
Nevertheless the program continues to run according to the
programmed cycle, however, in the background.
During interruptions/pauses you can effect cleaning or maintenance
works.
4.1.1
**********************
PROGRAM NO. 1
PAUSE STARTED
PLEASE WAIT
**********************
This message is displayed if the device is in a non-completed cycle
when starting the pause mode. Only after termination of the cycle,
the pause mode can be started.