Hach-Lange BUHLER 2000 Water sampler - Manual (Page 46)

Operation
Page 46 Manual Bühler 2000/1029
2.9.1
**********************
INFO MEMORY
DELETE
*SHOW
**********************
Here you can have displayed or delete the info memory. To show
the stored data, press the ENT key. Scroll with the up/down keys.
The following data is stored in the INFO MEMORY:
• Program start and end
• Bottle change with date and time
• Malfunction messages (e.g. voltage loss....etc.)
• Event start and end.
3.12.1
**********************
18.01.09 19:34 -> 2
SAMPLING (MAN)
18.01.09 19:350
BOTTLE CHANGE
**********************
Exemplary display for stored messages. Each entry is stored with
date and time.
The display always shows the latest entry.
- To see the oldest entry, press the left arrow key.
- To see the latest entry, press the right arrow key.
With the up/down keys you can scroll. From any entry you can
return to the oldest entry by pressing the „ENT“ key.
2.9.2
**********************
BOTTLE MEMORY
**********************
Stored protocol of bottle filling. Press the ENT key to see the
contents of the bottle memory.
3.13.1
**********************
BOTTLE 1
19.01.09 18:50-19:04
12 MINUTES
S. REQ/TAKEN 13/13
**********************
With the up/down keys you can scroll to the different bottle
numbers.
The following information is displayed:
• Bottle number
• Date and filling period (from – to)
• Total filling time
• Requested and taken samples.
2.9.4
**********************
ANALOGUE FLOW
SIGNAL
12.2 mA
*STORED VALUES
**********************
Display of the stored ANALOGUE FLOW SIGNAL.
Press the ENT key to see the contents of the analogue
signal memory.
3.15.1
**********************
18.01.09 23-00 12.2
19.01.09 00-01 12.2
19.01.09 01-02 ----
19.01.09 02-03 ----
**********************
The analogue signal is stored as an hourly average value.
2.9.5
**********************
2ND ANALOGUE INPUT
FORMAT
*INFO
**********************
A second analogue input is available which can also be stored in
the memory. Here you can enter the storage interval.