Operation – Hach-Lange BUHLER 2000 Water sampler User Manual
Page 49
Operation
Page 49
Manual Bühler 2000/1029
3.18.20
**********************
OUTPUTS
OUTPUT 1
OUTPUT 2
OUTPUT 3
**********************
Here you can check the outputs.
If you press ENT and a relay is connected, you can check whether
the output is o.k.
3.18.21
**********************
INPUT SIGNALS
FILLING LEVEL 100
FLOW ANAL
12.2 mA
EVENT 0 / FLOW DIG 0
**********************
The status of various inputs can be inquired.
Example:
• FILLING LEVEL 250 (or higher)
Level electrodes are bridged (the respective value is directly re
lated to the conductivity. However, the indicated value has no
dimension)
• FLOW ANALOGUE 12 mA
There are 12 mA at the analogue input.
• EVENT 0 (1)
0 = There is no event signal
1 = There is an event signal
• FLOW (digital) 0 (1)
0 = No pulse
1 = Pulse (digital)