Ab-3000 – Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems User Manual

Page 26

Advertising
background image

pin #

COLOR

SIGNAL NAME:

(left)

1

WHITE

signal ground

2

BLACK

- serial data OUT from AB/DR-3000

3

RED

+ serial data OUT from AB/DR-3000

4

GREEN

- serial data IN to AB/DR-3000

5

YELLOW

+ serial data IN to AB/DR-3000

(right)

6

BLUE

signal ground

The proper data format, and pinouts for connecting this plug to a PC or Macintosh computer are in

the section of the manual on Serial Port Commands.

AB-3000:

a

b

c

d

f

k

h

Earth Ground

+ DMX Input

- DMX Input

Analog Input 1

Ground

SMPTE out (-1, +6)/in (-2, +7), Status

outs (-3, +8 ,+5), AES/EBU out (-4, +9)

1/4 J-6

Input

RS-422 Serial Data in/out

Analog Input 2

Line Out

(LEFT)

R-

T+

S

gnd

Amp

}

Balanced Output

T+ S

gnd Amp

}

Unbalanced Output

Line Out

(RIGHT)

R-

T+

S

gnd

Amp

}

Balanced Output

T+

S

gnd Amp

}

Unbalanced Output

c) 1/4 J6 In: Ten position enclosed header compatible with IDS-10 connectors. There is one of

these connectors for each slot in the card cage.

SUPPLY (not used)

+

(Brown) PIN #1

(red) PIN #2

(orange) PIN #3

(yellow) PIN #4

(green) PIN #5

(blue) PIN #6

(violet) PIN #7

(grey) PIN #8

(white) PIN #9

(black) PIN #10

GROUND (not used)

DATA BIT 7

DATA BIT 6

DATA BIT 5

DATA BIT 4

DATA BIT 3

DATA BIT 2

DATA BIT 1

DATA BIT 0

+ 5 to 24 VDC SUPPLY

GROUND

DATA BIT 7

DATA BIT 6

DATA BIT 5

DATA BIT 4

DATA BIT 3

DATA BIT 2

DATA BIT 1

DATA BIT 0

Internal Power

External Power

(Brown) PIN #1

(red) PIN #2

(orange) PIN #3

(yellow) PIN #4

(green) PIN #5

(blue) PIN #6

(violet) PIN #7

(grey) PIN #8

(white) PIN #9

(black) PIN #10

A CC-3004 has four for these connectors on it, while the CC-3016 has sixteen. This input

connector uses the standard Ô1/4 J6Õ pinout used in all the Animation Control Systems manu-
factured by Gilderfluke & Company. All eight inputs are optically isolated from the AB/DR-
3000, and so an external source of power is needed to run this input

17

. The current draw is

less than sixteen ma. per input, so a small wall mounted DC power supply will be sufficient to
drive it. The PS-200 Power Supplies have a 24 VDC output on them that can be used to power

G

ILDERFLUKE

& C

O

. ¥ 205 S

OUTH

F

LOWER

S

T

. ¥ B

URBANK

, C

ALIF

. 91502-2102 ¥ 818/840-9484 ¥

FAX

818/840-9485

18 of 92

17

The AB-3000 has a jumper option of supplying power to the 1/4 J6 input from the AB-3000Õs power

supply. If this option is used, then simple switch closures can be used on these inputs.

Advertising