Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems - Manual (Page 77)

2) Tell your computer to send this file through the serial port to the repeaters. The same string of
gibberish you saw during the Configuration Dump command will go shooting by as it is
reloaded into the the addressed AB/DR-3000s.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
Start Commands:
"t" (CARD#) (1=left, 2=right, 3=both) Start Card #:
"u" (1=left, 2=right, 3=both) Start All:
"v" (1=left, 2=right, 3=both) Start Cocked:
"w" (GROUP#) (1=left, 2=right, 3=both) Start Group:
These commands start the AB/DR-3000(s) addressed by the command. If the addressed AB/DR-3000
is looping, it will have its looping mode reset. If the AB/DR-3000 is already playing, it can be configured
to do one of the following things:
1) IGNORE IT.
2) SAVE THE START UNTIL IT FINISHES RUNNING.
3) JUMP TO THE START OF THE NEXT SPIEL.
If the AB/DR-3000 receives a start command after it has received a request for a specific spiel, it will
play that spiel. Requests for specific spiels can come from the serial port or the 1/4 J6 inputs (DMX ÔaÕ
can also be mirrored to the 1/4 J6 input).
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
Stop Commands:
"x" (CARD#) (1=left, 2=right, 3=both) Stop Card #:
"y" (1=left, 2=right, 3=both) Stop All:
"z" (1=left, 2=right, 3=both) Stop Cocked:
"G" (GROUP#) (1=left, 2=right, 3=both) Stop Group:
These commands stop the selected AB/DR-3000(s) unconditionally.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
Reset Commands:
"H" (CARD#) (1=left, 2=right, 3=both) Reset Card #:
"I" (1=left, 2=right, 3=both) Reset All:
"JÓ (1=left, 2=right, 3=both) Reset Cocked:
"K" (GROUP#) (1=left, 2=right, 3=both) Reset Group:
These commands reset the addressed AB/DR-3000s to the start of their memory. If stereo ROMs are
installed or the command is received by the left side repeater, then the Ônext spielÕ pointers are set the
first spiel on the repeater. If the Left/Right Split has been set, then the Right sideÕs ÔnextÕ is set the next
spiel after the ÔsplitÕ. Otherwise it too is set to point to the first spiel. If the repeater was playing when the
RESET was received, the sound then continues from the new point in memory.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
Mute Commands:
"L" (CARD#) (1=left, 2=right, 3=both) Mute Card #:
"M" (1=left, 2=right, 3=both) Mute All:
"N" (1=left, 2=right, 3=both) Mute Cocked:
"O" (GROUP#) (1=left, 2=right, 3=both) Mute Group:
These commands unconditionally mute the AB/DR-3000(s) selected. If the AB/DR-3000(s) selected
are already half-muted, this command will override that condition and fully mute them.
G ILDERFLUKE & C O . ¥ 205 S OUTH F LOWER S T . ¥ B URBANK , C ALIF . 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485
69 of 92