Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems User Manual

Page 59

Advertising

the new settings will be written to the RTC chip the instant the ÔselectÕ is returned to the ÔhomeÕ
position (display blanked). This value will continue to indicate the current time until any RTC
value is changed. It will then stop advancing.

n) moNth: Available only if Real Time Clock (RTC) option is installed. The range of adjustment is

from 0-12. If any RTC adjustment is changed, the ÔSelectÕ digit will start flashing to indicate that
the new settings will be written to the RTC chip the instant the ÔselectÕ is returned to the ÔhomeÕ
position (display blanked). This value will continue to indicate the current time until any RTC
value is changed. It will then stop advancing.

o) day Of week: Available only if Real Time Clock (RTC) option is installed. The range of adjust-

ment is from 1-7 (Sunday=1, Saturday=7). If any RTC adjustment is changed, the ÔSelectÕ digit
will start flashing to indicate that the new settings will be written to the RTC chip the instant the
ÔselectÕ is returned to the ÔhomeÕ position (display blanked).This value will continue to indicate
the current time until any RTC value is changed. It will then stop advancing.

¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥

ÒeÓ

All-Week=:

This toggle is used to select whether the Ôall-weekÕ schedule is checked on all seven days of the

week, or only on weekdays (Monday through Friday). This is used in business and school applications
where you donÕt want the AB/DR-3000 making noise on the weekends.

ÒfÓ

Tolling

(avail. only if any tolls have been set)

If mono ROMs have been installed, this allows you to select whether tolls disabled or are routed to

the left, right or both outputs. If stereo ROMs are installed, you can enable and disable the tolling using
this toggle.

ÒgÓ

Tolls:

If the AB/DR-3000 is between the Ôtolling hours of operationÕ, then a number of spiels can be auto-

matically scheduled to simulate the operation of a clock tower. Any spiel can be selected for playing on
the quarter, half, three-quarter or full hour.

The AB/DR-3000 can toll the hour on the full hour. This will automatically follow the spiel that plays on

the hour. The ÔChime 1Õ is used to play all strikes except for the final one. The final strike of any chime is
played by ÔChime 2Õ. This allows you to record a chime with an abbreviated ring-out for the first strikes
(the length of the spiels sets the space between them) and a chime with a long ring out for the final
strike. Although the clock is set using Ô24 hour timeÕ, the chiming always uses a 12 hour clock for decid-
ing the number of times it should strike.

This command is slightly different than most others. The <ESC>ape key will not work to exit the com-

mand if you enter it inadvertently. You have to make all eight entries once this command is started. To
clear a single entry, you can either type a <carriage return> by itself or enter 255/FFh.

ÒhÓ

Hours for Tolling:

This is used to set the hours of operation for the tolling on the selected day of the week. The hour of

operation can be set using the following rules:

Hours are set just to cover the hours you wish to make noise (i.e.: 9:00 AM to 5:00 PM)

If the ending time is before the start time, then the hours of operation are the time you donÕt
want the clock to chime. i.e.: if the hours are set for 08:00 to 02:00, then the clock will start
chiming at 12:00 AM and play until 2:00 AM. They will then start chiming again at 8:00 AM
and continue until 11:59 PM. This is shown on the display as:

ILDERFLUKE

& C

. ¥ 205 S

OUTH

LOWER

. ¥ B

URBANK

, C

ALIF

. 91502-2102 ¥ 818/840-9484 ¥

FAX

818/840-9485

51 of 92

Advertising

Popular Brands

Popular manuals