Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems - Manual (Page 57)

- R EAL T IME C LOCK T RIGGER M ENU -
The AB/DR-3000 can be fitted with an optional real time clock. The clock has been factory laser
trimmed to be accurate within ten parts per million. A battery keeps the clock running even during
power failures. This menu is available only if this hardware option has been installed.
-Sixteen Bit Digital Audio System rev 1.19 copyright 1996 Gilderfluke & Co. DCM-
- card __0 RTC Trigger Menu -
a) modify entry... | c) tick/tock delay- 9.9 | e) all-week= Sat thru Sun
b) set time... | d) set from front- no | f) tolling- left
1/4 1/2 3/4 full chime1 chime2 tick tock
g) Clock tolls- |__11__|__22__|__33__|__44__|__55__|__66__|__77__|__88__|
Sunday: h) hours for tolling- 00:00-01:15 / 08:00-23:59
01) 12:03 __4 left 02) 03:04 __5 right 03) 04:05 __6 both 04) 11:22 nxt left
05) _______________ 06) _______________ 07) _______________ 08) _______________
09) _______________ 10) _______________ 11) _______________ 12) _______________
13) _______________ 14) _______________ 15) _______________ 16) _______________
17) _______________ 18) _______________ 19) _______________ 20) _______________
21) _______________ 22) _______________ 23) _______________ 24) _______________
25) _______________ 26) _______________ 27) _______________ 28) _______________
29) _______________ 30) _______________ 31) _______________ 32) _______________
j) next schedule m) more.... o) reload defaults X) eXit
DST 23:08:25 Wednesday September 07,'95 command-
The AB/DR-3000 supports an eight day schedule. The first seven of these schedules represent the
days of the week (Sunday through Saturday). The eighth schedule is a special Ôall-weekÕ schedule. This is
for events you want to happen every day of the week
30 .
If the AB/DR-3000 is not currently playing any other spiel (except for the two designated as Tick and
Tock), it will check the schedules in the following order. Most are checked once per minute:
1) Day of week: This takes precedence over all other schedules.
2) All-week schedule is checked next if no day of week entry was found.
3) If within the Ôtolling hours of operationÕ you have set for the day, it will check for quarter, half,
three quarter and full hour tolls.
4) If within the Ôtolling hours of operationÕ you have set for the day, it will check if it is time to toll
the hour.
5) If within the Ôtolling hours of operationÕ you have set for the day, it will check for Tick and Tock.
These spiels are not respected by anyone, and another scheduled spiel can be started even if
they are running. Be sure to set the STORE function for early starts if you donÕt want these to be
cut off at mid-spiel! The Tick/Tock delay should be set to a time that is longer than it takes for
the Tick and Tock sounds to play. If you donÕt, the storage buffer will quickly overflow.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒaÓ Modify Entry:
You are prompted as to which entry in the table you would like to modify. You are then prompted
for:
1) If mono ROMs are installed, you are asked whether the spiel should be sent to the Left, right or
G ILDERFLUKE & C O . ¥ 205 S OUTH F LOWER S T . ¥ B URBANK , C ALIF . 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485
49 of 92
30 The ÔAll-week =Õ toggle is used if you want the whole week to only include weekdays (Monday
through Friday).