Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems User Manual

Page 58

Advertising
background image

both outputs. Stereo spiels are always send to both outputs. You can enter a zero at this point
if you are just clearing an existing entry.

2)

Spiel number to be triggered, or zero for whatever spiel is next

31

.

3)

Time the spiel is to be played (HOURS and MINUTES).

Entries to the schedules must be made consecutively. Any empty entry will be interpreted as the last

entry in the table, even if more entries can be found further on. The values of each of the entries can
be in any order.

¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥

ÒbÓ

Set Time:

You are prompted for the current time. At the end, you have to option of enabling Automatic

Daylight Savings Time. When ON, this will tell the AB/DR-3000 to automatically ÔSpring forwardÕ at 2:00 AM
on the first Sunday in April, and ÔFall backÕ at 2:00 AM on the last Sunday in October. The time displayed
on this menu will have ÔDSTÕ before the time during the Summer months.

Note that once you have begun setting the clock, all scanning for special events, chimes, etc. will

cease until you have finished.

¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥

ÒcÓ

Tick/Tock Delay:

The Tick and Tock Spiels are used if you have to simulate the sound of a mechanical clock running.

These two sounds will be played alternately if anything has been entered for the Tick and Tock, and the
time is during the hours of tolling. This delay will be inserted between each playing of each Tick or Tock
sound.

¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥

ÒdÓ

Set from Front:

This toggle enables or disables the ability to set the clock from the front panel of the AB/DR-

3000.When the RTC option is installed in an AB/DR-3000, the following adjustments are available on the
front panel of the repeater. If this toggle is set to enable changing the time, they will flash to show they
are adjustable.

Note that once you have begun setting the clock, all scanning for special events, chimes, etc. will

cease until you have finished.

y)

Year: Available only if Real Time Clock (RTC) option is installed. The range of adjustment is from
0-99. If any RTC adjustment is changed, the ÔSelectÕ digit will start flashing to indicate that the
new settings will be written to the RTC chip the instant the ÔselectÕ is returned to the ÔhomeÕ po-
sition (display blanked). This value will continue to indicate the current time until any RTC value
is changed. It will then stop advancing.

i)

mInute: Available only if Real Time Clock (RTC) option is installed. The range of adjustment is
from 0-59. If any RTC adjustment is changed, the ÔSelectÕ digit will start flashing to indicate that
the new settings will be written to the RTC chip the instant the ÔselectÕ is returned to the ÔhomeÕ
position (display blanked). This value will continue to indicate until any RTC value is changed.

h) Hour: Available only if Real Time Clock (RTC) option is installed. The range of adjustment is

from 0-23. If any RTC adjustment is changed, the ÔSelectÕ digit will start flashing to indicate that
the new settings will be written to the RTC chip the instant the ÔselectÕ is returned to the ÔhomeÕ
position (display blanked). This value will continue to indicate the current time until any RTC
value is changed. It will then stop advancing.

t)

daTe: Available only if Real Time Clock (RTC) option is installed. The range of adjustment is
from 0-31. If any RTC adjustment is changed, the ÔSelectÕ digit will start flashing to indicate that

G

ILDERFLUKE

& C

O

. ¥ 205 S

OUTH

F

LOWER

S

T

. ¥ B

URBANK

, C

ALIF

. 91502-2102 ¥ 818/840-9484 ¥

FAX

818/840-9485

50 of 92

31

If the ROM set is mono, and the LEFT/RIGHT SPLIT has been set, then the left channel will only play

spiel numbers up to the split, and the right channel will play only spiels over the split.

Advertising