Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems User Manual
Page 28
SIGNAL NAME:
Pin #1
Ground
Pin #2
N/C
Pin #3
+ 5 VDC
Pin #4
- 12 to 15 VDC
Pin #5
+ 12 to 15 VDC
This is the only power supply connection on the AB-3000 AudioBrick.
g) Audio Outputs: Twenty-five position female DB-25 connector. This is used for the balanced
audio outputs from the DR-3000 and DR-4000s installed in the card cage. CC-3004 Card
cages have one of these connectors on them. CC-3016 Card cages have four of these con-
nections on them. Each DR-3000 or DR-4000 has two balanced audio outputs on it. The
pinouts of these connectors is as follows:
SIGNAL NAME COLOR
SIGNAL FUNCTION
PIN #1
Ground 1
BROWN
right card #0 Ground
PIN #14 + Output 1
RED
right card #0 Balanced Audio Line Level Positive (+)
PIN #2
- Output 1
ORANGE
right card #0 Balanced Audio Line Level Negative (-)
PIN #15
Ground 2
YELLOW
left card #0 Ground
PIN #3
+ Output 2
GREEN
left card #0 Balanced Audio Line Level Positive (+)
PIN #16
- Output 2
BLUE
left card #0 Balanced Audio Line Level Negative (-)
PIN #4
Ground 3
VIOLET
right card #1 Ground
PIN #17
+ Output 3
GRAY
right card #1 Balanced Audio Line Level Positive (+)
PIN #5
- Output 3
WHITE
right card #1 Balanced Audio Line Level Negative (-)
PIN #18
Ground 4
BLACK
left card #1 Ground
PIN #6
+ Output 4
BROWN
left card #1 Balanced Audio Line Level Positive (+)
PIN #19
- Output 4
RED
left card #1 Balanced Audio Line Level Negative (-)
PIN #7
Ground 5
ORANGE
right card #2 Ground
PIN #20
+ Output 5
YELLOW
right card #2 Balanced Audio Line Level Positive (+)
PIN #8
- Output 5
GREEN
right card #2 Balanced Audio Line Level Negative (-)
PIN #21
Ground 6
BLUE
left card #2 Ground
PIN #9
+ Output 6
VIOLET
left card #2 Balanced Audio Line Level Positive (+)
PIN #22
- Output 6
GRAY
left card #2 Balanced Audio Line Level Negative (-)
PIN #10
Ground 7
WHITE
right card #3 Ground
PIN #23
+ Output 7
BLACK
right card #3 Balanced Audio Line Level Positive (+)
PIN #11
- Output 7
BROWN
right card #3 Balanced Audio Line Level Negative (-)
PIN #24
Ground 8
RED
left card #3 Ground
PIN #12
+ Output 8 ORANGE
left card #3 Balanced Audio Line Level Positive (+)
PIN #25
- Output 8
YELLOW
left card #3 Balanced Audio Line Level Negative (-)
PIN #13
N/C
GREEN
The balanced line drivers used on the DR-3000 and DR-4000s are a SSM-2142. This chip
provides a high quality balanced output that is compensated for 600 ohm lines. If operating
in single ended mode, the unused outputs must be tied to their respective ground lines. If
you donÕt, the output will be excessively noisy.
i)
Audio Inputs & AES/EBU Inputs: Fifteen position male DB-15 connector. This is used to feed
analog and digital audio signals into a DR-4000 installed in slot 0 of the card cage. Additional
connectors may be wired to any other slots in the card cage if more than a single DR-4000 is
to be used. The pinout is as follows:
G
ILDERFLUKE
& C
O
. ¥ 205 S
OUTH
F
LOWER
S
T
. ¥ B
URBANK
, C
ALIF
. 91502-2102 ¥ 818/840-9484 ¥
FAX
818/840-9485
20 of 92