Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems - Manual (Page 68)

- I NPUT D IAGNOSTICS M ENU -
This screen is used to check the status of the various hardware and software inputs to the AB/DR-
3000. This is often used to help in diagnosing problems with the AB/DR-3000, or just for testing connec-
tions to it.
-Sixteen Bit Digital Audio System rev 1.19 copyright 1996 Gilderfluke & Co. DCM-
- card __0 Input Diagnostics Screen -
0 (1) 1 (2) 2 (3) 3 (4) 4 (5) 5 (6) 6 (7) 7 (8)
Opto inputs- |_____|_yes_|_____|_yes_|_____|_____|_____|_____|
Front Panel Inputs- |_yes_|_____|_____|_____|_____|_____|_____|_____|
Full Mute Zones- |_____|_____|_yes_|_____|_____|_____|_____|_yes_|
Half Mute Zones- |_____|_____|_yes_|_____|_____|_____|_yes_|_____|
Analog Inputs- |__13_|__14_|__15_|__16_|__17_|__18_|__19_|__20_|
Volume Control Zones- |__21_|__22_|__23_|__24_|__25_|__26_|__27_|__28_|
DMX-512 input a (__2) = _29
DMX-512 input b (_25) = _30
DMX-512 input c (120) = _31
DMX-512 input d (255) = _32
m) more.... x) eXit
please enter command-
Note that if nothing in this AB/DR-3000 has been configured to use the Analog or DMX-512 inputs,
that these values will NOT be updated.
The front panel inputs are used as follows:
1) ÔManualÕ front panel button
2) ÔSelectÕ front panel button
3) ÔUpÕ front panel button
4) ÔDownÕ front panel button
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒmÓ More.....:
This command allows you to select from the other menus:
1) Main Menu. This brings you back to the main menu.
2) Triggers. If mono ROMs are installed, it will ask if you want to setup the Left or Right Triggers.
3) SMPTE Setup. This is where you enter the SMPTE triggers for starting spiels. This menu is available
only if you have selected the SMPTE IN mode for the repeater.
4) Clock. This is where you setup the eight possible schedules, tolls, and set the clock. This menu
is available only if the Real Time Clock option has been installed on the AB/DR-3000.
5) Volume. This is where you set up the Digital Audio Bus and volumes.
6) Status Outputs. This is where you setup what the two status outputs do.
7) Diagnostics. This selects this menu.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒxÓ eXit Setup Mode:
This command is used to exit the setup mode. If you hit this command in error, hitting an <ESC>ape
key will get you back to the menu.
G ILDERFLUKE & C O . ¥ 205 S OUTH F LOWER S T . ¥ B URBANK , C ALIF . 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485
60 of 92