Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems - Manual (Page 73)

the command.
3) GROUP - There are sixteen possible groups in the AB/DR-3000. They are numbered from '0'
through 'F'. You can configure any AB/DR-3000 in the system to respond to any one of these
different groups (see the configuration sections of this manual for instructions on how to do
this). Commands of this type affect all cards that have the matching GROUP NUMBER. This
type of command can be used when you wish to access a number of cards at the same time.
EXAMPLE: A 'START GROUP#' command will start all cards that have been configured to re-
spond to the GROUP# in the command.
4) COCKED - You can set a flag on any number of different AB/DR-3000s that, when set, will
cause those cards to respond to commands of this type. Once cocked, you will have to un-
cock a card to stop it from responding to any more COCKED commands.
EXAMPLE: A 'START COCKED' command will start only those AB/DR-3000s which have had their
'COCKED' flags set.
Many of the commands sent to the AB/DR-3000s require you to specify whether it should be directed
to the Right, Left, or Both outputs if Mono ROMs are installed. This requires an extra Ф1Х, Ф2Х, or Ф3Х ASCII
character to follow the actual command (1=left, 2=right, 3=both). Other Animation Control Systems
and repeaters from Gilderfluke & Co. will simply ignore this extra character, so compatibility with other
equipment is maintained. Stereo ROMs require this extra character, but always play out of both the Left
and Right outputs.
G ILDERFLUKE & C O . ¥ 205 S OUTH F LOWER S T . ¥ B URBANK , C ALIF . 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485
65 of 92