IAI America RCP4CR-SA7C - Manual (Page 64)

3. Connecting with Controller
58
• PIO line, communication line, power and driving lines are to be put separately from each other and do
not tie them together. Arrange so that such lines are independently routed in the duct.
Power Line
Duct
I/O Line
(Flat Cable, etc.)
• If using a cable track, arrange the wiring so that there is no entanglement or kink of the cables in the
cable carrier or flexible tube, and do not bind the cables so that the cables are relatively free. (Arrange
the wiring so the cables are not to be pulled when bent.)
• The occupied volume rate for the cables, etc., inside the cable track should be 60% or less.
Cable
Cable Track