IAI America RCS2W - Manual (Page 109)

4. Maintenance Inspection
101
Bellows
4.7 Replacing the Bellows of the RCS2W Dustproof/Splash-proof Type
[Items Required for Replacement]
x Replacement bellows unit
: RA4 --- JB-RA4- (stroke)
x Phillips screwdriver
x Torque driver
x Grease
Kyodo Yushi Multemp LRL3
[Procedure]
1) Loosen the front and rear metal fittings affixing the bellows and remove the bellows.
Loosening of front metal fitting Loosening of rear metal fitting
Removal of bellows Bellows has been removed