IAI America RCS2W - Manual (Page 55)

2. Installation
47
[2] Handling in Assembled Condition
x When carrying the actuator, exercise caution not to bump it against nearby objects or structures.
x Secure the rods to prevent sudden movement during transport.
x If any end of the actuator is overhanging, secure it properly to avoid significant movement due to external
vibration.
x When transporting the assembly without the ends of the actuators fastened, do not subject the assembly to an
impact of 0.3 G or more.
x When suspending the mechanical equipment (system) with ropes, avoid applying force to actuator, connector
box, etc. Also, avoid the cables being pinched or caused an excessive deformation.