IAI America RCS2W - Manual (Page 80)

4. Maintenance Inspection
72
[3] Grease Supply to Rod Sliding Surface and Ball Screw
[Applicable Units: RCS2-SRA7BD, SRGS7BD, SRGD7BD]
䎃
[Rod sliding surface]
䎃
1) Move the rod to the stroke end with such as JOG operation in advance.䎃
2) Turn the power off.䎃
3) Apply grease evenly on the rod sliding surface.䎃
䎃 At this time, apply grease with soft cloth so the rod sliding surface would not get damaged with scratches.䎃
4) Turn the power on, and run the rod back and forth for several times with such as JOG operation so the
grease spreads out to the whole area of the rod sliding surface.䎃
䎃
Rod sliding surface
䎃
䎃
䎃