IAI America RCS2W - Manual (Page 44)

1. Specifications Check
36
1.2.6 Allowable Load Moment of Actuator
(1) Rod Type
x The actual load should not exceed the value specified in the catalog.
x Be sure to align the shaft center of the rod and the moving direction of the load.
x Lateral load may cause damage or breakdown of the actuator.
x If the rod may receive lateral load, provide a guide or other appropriate mechanism to support the
actuator in the moving direction of the load.
x Do not allow the rod (slide shaft) to receive rotational torque.
* Doing so may damage the internal parts.
Tighten the nut at the tip of the rod, while securely holding
the rod using a wrench of size 17 (RA4) or 22 (RA5).