IAI America MSEP User Manual
Page 42
Chapter 1 Specifications Check
34
(4) Cooling Factors and Installation
Design and Build the system considering the size of the controller box, location of the controller
and cooling factors to keep the ambient temperature around the controller below 40qC.
Pay a special attention to the battery unit since the performance of it would drop both in the low
and high temperatures. Keep it in a room temperature environment as much as possible.
(Approximately 20qC is the recommended temperature.)
20mm
or more
20mm
or more
20mm
or more
20mm
or more
20mm or more
50mm
or more
Ensure
enough space
for wiring.
50mm or more
Air outlet
(Heat
Radiation)
Air outlet
(Heat
Radiation)
Air inlet
Air inlet
For the attachment of the unit, use the fixture holes on the four corners or attach on the DIN rail.
(Attachment should be the same for the absolute battery box.)
Rear View
I
5 fixture hole
I
5 fixture hole
DIN rail
I
5 fixture hole
I
5 fixture hole
Lever for attachment to DIN rail