IAI America RCM-E User Manual
Page 54
46
Displays special input port hereinafter.
The display depends on the axis (controller) to be connected.
Displays the LS3 (intermediate point end position
detection) status.
Displays the SV (operating preparation completion)
status.
Displays the HEND (homing completion) status.
Displays ON if homing is completed, and displays
OFF if not.
* Displays the ALM (alarm output) status.
Displays ON when it is normal.
Monitor A.
00
out 02 LS2
OFF
Monitor A.
00
out 03 SV
OFF
Monitor A.
00
out 04 HEND
ON
Monitor A.
00
out 05 * ALM
ON
Displays the HMSW (homing check sensor) status.
Monitor A.
00
in HMSW
OFF
Monitor A.
00
PORT SW
ON
Monitor A.
00
Enable SW
ON
Monitor A.
00
CTL Ver
ae 030000
Slct Mode/M2
A. 00
* Monitor
Displays the PORT switch status.
Displays the Enable SW status.
Displays the software version of the controller.
The Screen returns to the mode select screen by
pressing the
key.