IDEC High Performance Series - Manual (Page 1103)

WindO/I-NV2 User’s Manual 24-11
1 Communicating with the MICRO/I
24
Online F
unction
To execute any function except project data download
The Target Slave dialog box will be displayed when any of the following functions are executed.
• Upload project data.
• Upload data from an external memory inserted in the MICRO/I.
• Delete data stored in the internal memory of the MICRO/I.
• Delete data from or format an external memory inserted in the MICRO/I.
• Display information about runtime system and project data.
• Monitor the MICRO/I.
Specifies the O/I Link Slave.
■ Target Slave
Select the slave station number (Slave 1 to Slave 15) that will be the subject of the operation.
■ Master IP Address
Specify the IP address of the O/I Link Master that is used to communicate between the O/I Link Slave and the
external device.
Click to display IP Address Manager. Specify the IP address for the O/I Link Master with IP Address Manager.
This option can only be displayed when O/I Link Slave is selected for Communicate with and Ethernet is
selected for Port in the Communication Settings dialog box.
■ Port Number
Specify the port number (0 to 65535) of the Web Server Unit connected to the destination MICRO/I that will the
operational target.
This can only be set when O/I Link Slave is selected for Communicate with and Ethernet is selected for Port
and the via Web Server Unit check box is selected in the Communication Settings dialog box.