IDEC High Performance Series - Manual (Page 192)

1 Creating and Manipulating WindO/I-NV2 Project Data
4-6 WindO/I-NV2 User’s Manual
●
Opening project data in a previous format
You can open project data that was created with WindO/I-NV2 Ver. 2.7 or earlier.
Project data in the previous format is a folder composed of multiple files.
1 Click , then click to the right of Open, and then click Previous Format Project.
Select the project data with the Open Project dialog box.
2 Select the file and click OK.
A conversion confirmation message is displayed.
■ Project Name
Shows the project name for the selected project data.
■ Project
Specify the folder where the project data is saved.
■ Drive
Specify the drive assigned to the hard drive, memory card, or USB Flash Drive.
■ Network
Displays the Map Network Drive dialog box. This dialog box allows you to specify a drive on the network.
■ Find
Searches for project data in the specified folder.