IDEC High Performance Series - Manual (Page 484)

1 Pilot Lamps
9-4 WindO/I-NV2 User’s Manual
Example: When Action Mode is Flash (ON + Flash), Flash Trigger Device is M 0, and on the Trigger
Condition tab, Trigger Type is While ON, Device is LM 0
0
Displayed drawing object
Trigger Condition: Device LM0 value 1 1 0
0 Action Mode: Value in trigger device M0 0 1 1
Displays OFF
drawing object
Action
Displays ON
drawing object
Flashing
Displays OFF
drawing object
The lamp will neither turn on or flash if the trigger conditions are not met. Lamp trigger conditions are
configured on the Trigger Condition tab.