IDEC High Performance Series - Manual (Page 1337)

WindO/I-NV2 User’s Manual 34-21
2 HG2G-5F, HG3G/4G
34
MICRO/
I Specif
ication
s
2.5 Specifications
■ Applicable Standards
■ Environmental Specifications
■ Electrical Specifications
■ Construction Specifications
*1 When using the HG2G-5F, HG4G as the EMC Standard Approved Products, or when using the HG2G-5F, HG3G/4G as the Ship
Classification Standard Approved Products, attach a ferrite core (ZCAT3035-1330 manufactured by TDK Corporation) to the
power cables and the communication cables.
Type No. HG2G-5F HG3G-8 HG3G-A HG4G
Safety Standard
UL508
CSA C22.2 No.142
(c-UL) UL508, ANSI/ISA-12.12.01-2007
CSA C22.2 No.142 (c-UL)
CSA C22.2 No.213 (c-UL) UL508
CSA C22.2 No.142
(c-UL)
EMC Standard *1 IEC/EN 61131-2:2007
Ship Classification Standard *1 ABS, DNV, LR, NK
Ferrite Core：ZCAT3035-1330（TDK）
Operating Ambient Temperature 0 to 50°C
Operating Relative Humidity 10 to 90% RH (no condensation)
Storage Ambient Temperature -20 to +60°C
Storage Relative Humidity 10 to 90% RH (no condensation)
Altitude (Operation) 0 to 2000m
Pollution Degree 2
Corrosion Immunity Free from corrosive gases
Type No. HG2G-5F HG3G-8 HG3G-A HG4G
Rated Operating Voltage 24V DC
Power Consumption 19W maximum 25W maximum 27W maximum
When not using USB2 and EXT 10W maximum 15W maximum 18W maximum
Power Voltage Range 20.4 to 28.8V DC
Allowable Momentary Power
Interruption
10 ms maximum
Inrush Current 30A maximum
Dielectric Strength AC1000V, 10mA, 1 minute (between power and earth terminals)
Insulation Resistance 10 MΩ minimum (500V DC megger) (between power and earth terminals)
Vibration Resistance
5 to 8.4Hz amplitude 3.5mm, 8.4 to 150Hz acceleration 9.8m/s 2
10 times on each of three mutually perpendicular axes (100 minutes) (IEC61131-2)
Shock Resistance
147m/s 2 , 11ms (5 shocks on each of three mutually perpendicular axes)
(IEC61131-2)