IDEC High Performance Series - Manual (Page 294)

3 Part Types
6-4 WindO/I-NV2 User’s Manual
3.4 Charts
3.5 Commands
Part Description
Bar Chart Displays device values in a Bar Chart.
Line Chart Displays data logs and device values in a Line Chart.
Pie Chart Displays device values in a Pie Chart.
Meter Displays device values using a needle gauge.
Part Description
Bit Write Command Writes a 0 or 1 to a bit device when certain trigger conditions are satisfied.
Word Write Command
Writes a value to a word device when certain trigger conditions are satisfied. Can be used to
indirectly specify the destination address or to perform operations on the written value.
Goto Screen Command
Switches to another screen or displays a window when certain trigger conditions are
satisfied.
Print Command
Outputs a screenshot to a printer or a memory card when certain trigger conditions are
satisfied.
Script Command Executes a script when certain trigger conditions are satisfied.
Multi-Command Executes multiple commands at once when certain trigger conditions are satisfied.
Timer
Starts a countdown when certain trigger conditions are satisfied, and writes 1 to an internal
device (HG timer relay LTC) after the set time has elapsed.