Oper ation log function – IDEC High Performance Series User Manual

Page 887

Advertising
background image

WindO/I-NV2 User’s Manual

15-5

1 Overview

15

Oper

ation Log Function

8. Part Name:

The part name for the pressed touch switch when the Press buttons event occurs.

9. Device Address:

The destination device when the Write Data to any Devices event occurs.
When an indirect write is used, the device specified by the indirect value is recorded.
Example: When the device configured as the destination for the value 100 is LDR 100 and

the indirect value is 3

10. Changed to:

The result produced from the event that occurred. The recorded content varies based on the
event that occurred.
Switch to Base Screen: The screen type and number after switching.

Base n:

Base screen (n: screen number)
Example: Base 1

Change Users:

The user name after the change.

Change Operation Modes: The operation mode after the change.

Run Mode:

Run Mode

System Mode:

System Mode

Monitor Mode:

Monitor Mode

Simulation Mode: Simulation Mode

Write Data to any Devices: The value written to the device by pressing the touch switch. This

value is handled as BIN16 (+). For details, refer to Chapter 2 “1.2
Available Data” on page 2-2.
The value written to the device is recorded as BIN16 (+)
regardless of the data type.
Example: When -10 (0xFFF6) is written to device D 0

If the written value is 2 words (32 bits), each word is recorded (16
bits). For the storage order for 32-bit device data, the upper word
and lower word are stored following the Storage Method of 32-
bit Numerical Data
setting. Storage Method of 32-bit
Numerical Data
is configured on the System tab in the Project
Settings dialog box. For details, refer to Chapter 4 “3.1 System
Tab” on page 4-26.
Example: When Storage Method of 32-bit Numerical Data is

from Lower word and 12345678 (0xBC614E) is
written to device D 0 with the data type BIN32 (+)

Event Name

Part Name

Details

Changed to

Press buttons

WordSwitch1

‒

‒

Write Data to any Devices

‒

LDR 103

100

Event Name

Part Name

Details

Changed to

Press buttons

WordSwitch1

‒

‒

Write Data to any Devices

‒

D 0

65526 (0xFFF6)

Event Name

Part Name

Details

Changed to

Press buttons

WordSwitch1

‒

‒

Write Data to any Devices

‒

D 0

24910 (0x614E)

Write Data to any Devices

‒

D 1

188 (0xBC)

Advertising
This manual is related to the following products: