IDEC High Performance Series - Manual (Page 863)

WindO/I-NV2 User’s Manual 14-25
3 Data Log Settings Dialog Box
14
Data Log Function
●
Data Tab
The Data tab is used to configure the data to sample.
■ Channel No.
Shows the selected channel number.
■ Number of Data
Specifies the number of devices (1 to 128) for sampling data. Samples values of devices in this amount starting with
the device configured as the source device on the General tab.
■ Use Text Manager
Select this check box to use text registered in the Text Manager for labels when outputting data as CSV.
■ Label *1
*1 HG2G-S/-5S/-5F, HG3G/4G only
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
The maximum amount of data that can be configured for one channel is 128. However, for the HG2G-5F and
the HG3G/4G, if 32-bit is selected for Data Size, it is counted as 16-bit data times 2 devices, so the
maximum number devices that can be configured for one channel is 64. Data Size is configured with the
General tab on the Individual Settings dialog box.
Sampling Time: Specifies the label to display in the sampling time column when outputting data as CSV.
Text ID
Specifies the Text Manager ID number (1 to 32000) when text registered in Text
Manager are used for labels.
Click to open Text Manager where you can edit the text.
This option is only enabled if you select the Use Text Manager check box.
(Text) Enter the text to display in the label. The maximum number is 40 characters.
Text can only be entered when the Use Text Manager check box is cleared. The
registered text is displayed when a text ID is specified.