IDEC High Performance Series - Manual (Page 819)

WindO/I-NV2 User’s Manual 13-21
3 Alarm Log Settings Dialog Box
13
Alarm Log Function
●
Memory Card Output Tab
The Memory Card Output tab is used to configure whether or not to output saved data to the memory card.
The output data is stored in the following folder on the memory card.
The default memory card folder name is “HGDATA01”. For details, refer to Chapter 30 “1.5 Setting the Memory Card
Folder” on page 30-16.
HG2G-5F, HG3G/4G: \Memory card folder\ALARMLOG
HG2F/3F/4F: \Memory card folder\ALARM
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Sampled data after starting output to the memory card is not included in the output data.