Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 10)

LabMaster 9 Zi-A
2 922157-00 Rev A
Safety Instructions
This section contains instructions that must be observed to keep the
instrument operating in a correct and safe condition. You are required to
follow generally accepted safety procedures in addition to the precautions
specified in this section. The overall safety of any system incorporating
this instrument is the responsibility of the assembler of the system.
Symbols
These symbols appear on the instrument's front or rear panels and in
documentation to alert you to important safety considerations.
CAUTION of damage to instrument, or WARNING of hazard to
health. Attend to the accompanying information to protect
against personal injury or damage. Do not proceed until
conditions are fully understood and met.
WARNING. High Voltage. Risk of electric shock.
Measurement ground connection.
Safety (protective) ground connection.
Alternating Current.
Standby Power (front of 9CZi-A, MCM-Zi, and 9xxMZi-A).
Power On (back of 9xxMZi-A); connected to AC mains.
Power Off (back of 9xxMZi-A); disconnected from AC mains.