Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 84)

LabMaster 9 Zi-A
76 922157-00 Rev A
Vertical Controls
NOTE: You can turn channels on and off using the software as explained in Vertical
Overview (on page 111), from The Front of Your 9xxSZi-A Slave Acquisition Module
(on page 22) or from the The Front of Your 9xxMZi-A Master Acquisition Module
(on page 16), where applicable.

Channels - The channel buttons control both channel ON/OFF and
which channel is active for the Vertical Offset and Volts/Div knobs
controls. If a channel is OFF, pressing that channel button turns it on
and makes it active. If a channel button is ON, pressing that channel
button makes it active, and then pressing it a second time turns it
OFF.

Offset - Press to toggle between a zero vertical offset value and the
previous vertical offset value for the selected channel. Turn to
change the vertical offset value for the selected channel.

Gain - Press to toggle between fixed and variable gain adjustment.
Turn to change the gain value.