Teledyne LeCroy LabMaster 9Zi-A User Manual
Page 155
Getting Started Manual
922157-00 Rev A
147
Sequence Mode Display
Set up a Sequence Mode display by first selecting a Sequence trigger mode
in the Timebase → Horizontal Setup dialog. You must also have entered a
Num Segments value. For more information on setting up Sequence Mode,
see the Sequence Sampling Mode (on page 101) topic.
1. Touch Display → Display Setup... on the menu bar.
2. Touch inside the Display Mode control and select a display mode
from the pop-up menu.
Touch inside the Num seg displayed control and enter a value, using
the pop-up keypad.
Touch inside the Starting at control and enter a value.
Moving Traces from Grid to Grid
You can move traces from grid to grid with the touch of a button.
1. Touch the trace descriptor label for the waveform you want to
move.
2. Touch the Next Grid button.
NOTE:
If you have more than one waveform displayed on only one grid, a second
grid automatically opens when you select
Next Grid
.
Displays Containing Masks
Since masks are pixel-based display renderings, you can think of them as
part of the Display feature set on your instrument. Masks and mask testing
are applied to waveforms as part of Pass/Fail functionality accessed from
Analysis → Pass/Fail from the menu bar.
NOTE:
For more detailed information about Masks and other Pass/Fail
functionality, such as removing a mask from your display, refer to
Mask Testing
.