Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 233)

Getting Started Manual
922157-00 Rev A 225
E-Mail
Before you can send e-mail from the oscilloscope, configurations must be
made on this dialog.
1. On the E-Mail Server section of the dialog, choose a server protocol:

MAPI (Messaging Application Programming Interface) is the
Microsoft interface specification that allows different
messaging and workgroup applications (including e-mail,
voice mail, and fax) to work through a single client, such as
the Exchange client. MAPI uses the default Windows e-mail
application.

SMTP (Simple Mail Transfer Protocol) is a TCP/IP protocol for
sending messages from one computer to another through a
network. This protocol is used on the Internet to route e-mail.
In many cases no account is needed.
2. Provide values for SMTP Server and Address fields in the
Configuration section of the dialog:

If you chose MAPI, touch inside the Originator Address
(From:) data entry field and provide the instrument's e-mail
address. Then touch inside the Default Recipient Address
(To:) data entry field and provide the recipient's e-mail
address.

If you chose SMTP, touch inside the SMTP Server data entry
field and provide the name of your server. Touch inside the
Originator Address (From:) data entry field and provide the
instrument's e-mail address. Then touch inside the Default
Recipient Address (To:) data entry field and provide the
recipient's e-mail address.
3. The Overview of E-Mail modes section of the dialog provides helpful
descriptions for your Server selection (made during the first step in
this topic).
4. Use the Send Test Mail button to ensure proper E-Mail configuration
by way of sending a confirmation message.